1 Phase Board - Outdoor Part # IB1POB

Components

* IP65 rated surface mount enclosure for outdoor installations

* 63 amp 1 phase Main switch

* 10 amp 1 phase MCB for Envoy

* 20 amp 1 phase MCB for solar circuit

* 20 amp 1 phase MCB ready for battery installation

* Supplied and pre-installed Envoy

* Supplied and pre-installed 100 amp Production CT

* 100 amp Consumption CT - Included

Wiring

* Completely pre-wired with neat cable management

* All wiring boot lace crimped for solid, safe & secure terminations

* Production CT securely mounted inside enclosure

* Consumption CT cabling installed from Envoy to large terminal strips inside the  enclosure to make connection of the Consumption CT cabling fast & easy

* Maximum array size of 4.6 Kilowatts at 20 amps

Programming

* Latest Enphase software & CT configuration pre-programmed saving up to 1 hour onsite

* Precisely located holes provide easy access to AP mode and device scan buttons

* Envoy serial number labelled inside door for ease of installation & commissioning

* Neat clear window for viewing LED communication lights

* Every iBoard is fully bench tested and quality checked prior to dispatch

Labelling

* Labelled using UV stabilised quality labels to
AS5033/4777 standards

* Labels for main switch board included

* AC battery label kit included

Additional

* Removable chassis rack for easy mounting to
wall & easy cable Installation keeping dust out of components during installation

* Enough room to fit the Enphase Mobile Connect module inside

* Optional locking accessory for securing the door

* Quality Legrand Enclosure Terminals & MCBs 

* Original pole fillers used to match the enclosure colour

* No screws to lose - fast and easy clip on cover design - Indoor Board

* No screws to lose - with captive screw design - Outdoor Board

* Installation Manual included

  • 5 Years Warranty on parts
  • Dimensions H 435mm W 340mm D 165mm
single phase IQ Series outdoor on angle 600x530