3 Phase Board - Outdoor Part # IB3POB

Components

* IP65 rated surface mount enclosure for outdoor installations

* 63 amp 3 phase Main switch

* 10 amp 3 phase MCB for Envoy

* 20 amp 3 phase MCB for solar circuit

* 20 amp 1 phase MCB ready for battery installation

* Supplied and pre-installed Envoy

* Supplied and pre-installed 100 amp Production CT

* 3 x 100 amp Consumption CTs - Included

Wiring

* Completely pre-wired with neat cable management

* All wiring boot lace crimped for solid, safe & secure
terminations

* Production CT securely mounted inside enclosure

* Consumption CT cabling installed from Envoy to large
terminal strips inside the  enclosure to make connection of
the Consumption CT cabling fast & easy

* Maximum array size of 13.8 Kilowatts at 20 amps

Programming

* Latest Enphase software & CT configuration
pre-programmed saving up to 1 hour  onsite

* Precisely located holes provide easy access to
AP mode and device scan buttons

* Envoy serial number labelled inside door for ease
of installation & commissioning

* Neat clear window for viewing LED communication lights

* Every iBoard is fully bench tested and quality checked
prior to dispatch

Labelling

* Labelled using UV stabilised quality labels to
AS5033/4777 standards

* Labels for main switch board included

* AC battery label kit included

Additional

* Removable chassis rack for easy mounting to
wall & easy cable Installation keeping dust out of components during installation

* Enough room to fit the Enphase Mobile Connect module inside

* Optional locking accessory for securing the door

* Quality Legrand Enclosure, MCBs & Phase Coupler

* Original pole fillers used to match the enclosure colour

* No screws to lose - with captive screw design 

* Installation Manual included

  • 5 Years Warranty on parts
  • Dimensions H 625mm W 340mm D 165mm
3 Phase S Series outdoor on angle 630x530